Panel Furniture Machines
Every machine a panel furniture shop needs, in the order a board moves through them: cut, edge band, drill.
CNC nesting machines
Cut, drill and groove every cabinet part from a full sheet in one setup. Five configurations, from a 4-process starter machine to an automatic line.

ATC CNC Nesting Machine
Linear, 8–12 tools
Cabinet shops with varied parts, door patterns and several board types

Nesting Machine with Drilling Block
Linear ATC
Parts with many shelf-pin rows and hinge holes

4-Process CNC Nesting Machine
None (fixed tools)
Small shops moving from a panel saw, simple repeating parts

Invisible Connector Nesting Machine
Linear ATC
Wardrobes and cabinets with no visible cam locks

Automatic Nesting Cell (Loading, Labeling & Unloading)
Linear ATC
Factories cutting all day with one operator per line
Edge banding machines
An automatic edge bander glues the edging on, trims it flush, scrapes the corner and buffs it in one pass. Seven models, from a compact machine to a high-speed line and a laser edge bander.

Compact Automatic Edge Bander
16–23 m/min
Small shops banding a few hundred edges a day

Edge Bander with Pre-Milling
16–23 m/min
Shops that want a tight glue line on every panel

Edge Bander with Pre-Milling and Corner Rounding
16–23 m/min
Doors and visible fronts that need rounded corners

Edge Bander with Dual Glue Pots
16 / 18 / 23 m/min
Shops switching between light and dark edging every day

High-Speed Edge Banding Machine
18 / 23 / 28 m/min
Factories banding all shift at up to 28 m/min

Laser Edge Banding Machine
18 / 23 / 28 m/min
Premium fronts where no glue line may show

45° Bevel Edge Banding Machine
12 m/min
Handle-free doors with a 45° beveled edge

6-sided CNC drilling machines
Drills all six faces of a panel in one clamping, including the horizontal holes for dowels and connectors that a nesting machine cannot reach. Parts are identified by barcode, so the operator only feeds them in.
- Works with
- Labeled parts from a nesting machine or panel saw
- Versions
- Single or double drill block, with return conveyor on request
- Typical step up
- When manual side drilling limits your output
Also built at the factory
Not every shop needs these, but they come from the same production floor.
Not sure where to start?
- Production line
Which machines make up a cabinet line?
Starter, growing and factory setups side by side.
- Comparison
Nesting machine or panel saw?
When nesting pays off, and when a saw is still faster.
- Price guide
What does a nesting machine cost?
Which options change the price, and what to budget beyond the machine.
Tell us what you need to make
Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.
- What you get back
- A recommended configuration, FOB or CIF price and lead time.
- Useful to include
- Sheet size, board types, your power supply and any machines you already own.
- Want to see it first?
- Ask for a video call from the factory floor.


