45° bevel saw
A saw cuts the 45° bevel into the panel edge inside the machine, so a square-cut panel goes in and a beveled, banded one comes out.
Cuts a 45° bevel into the panel edge and bands the beveled and straight faces in the same pass. Built for handle-free doors and drawer fronts.
Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.
A handle-free door has its top or bottom edge cut back at 45°, which leaves a finger grip behind the front face. Banding that sloped face on a standard edge bander is not possible, so it is usually done by hand or on separate machines. This model saws the bevel and bands it in one pass.
Next to a standard edge bander. The straight edges of the door are banded on the standard machine, and the grip edge goes through this one.
A saw cuts the 45° bevel into the panel edge inside the machine, so a square-cut panel goes in and a beveled, banded one comes out.
One glue unit coats both the beveled face and the straight face, and the pressure section follows the same profile.
Panels ride on a chain track and are held down from above by a row of rollers, so they stay straight through every station.
Stations, feed speed and glue temperature are set on the touchscreen, and saved settings can be recalled for each tape type.
Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.
Added at the factory when your machine is built.
| Model | Panel thickness | Feed speed | Best for |
|---|---|---|---|
| Compact Automatic Edge Bander | 9–60 mm | 16–23 m/min | Small shops banding a few hundred edges a day |
| Edge Bander with Pre-Milling | 9–60 mm | 16–23 m/min | Shops that want a tight glue line on every panel |
| Edge Bander with Pre-Milling and Corner Rounding | 9–60 mm | 16–23 m/min | Doors and visible fronts that need rounded corners |
| Edge Bander with Dual Glue Pots | 9–50 mm | 16 / 18 / 23 m/min | Shops switching between light and dark edging every day |
| High-Speed Edge Banding Machine | 9–60 mm | 18 / 23 / 28 m/min | Factories banding all shift at up to 28 m/min |
| Laser Edge Banding Machine | 9–60 mm | 18 / 23 / 28 m/min | Premium fronts where no glue line may show |
| 45° Bevel Edge Banding Machine this model | 18–25 mm | 12 m/min | Handle-free doors with a 45° beveled edge |
PVC, ABS, melamine and veneer edging in coils. The tape thickness range for each model is listed in the specifications.
EVA hot-melt glue as standard. A PUR glue system can be fitted for kitchens, bathrooms and other damp environments.
It depends on the model and on whether pre-milling is switched on. The minimum panel size is listed in the specifications.
Yes. Every machine is run at the factory before packing, and you can join a video call to watch your own machine band test panels.
Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.