Edge Banding Machines

High-Speed Edge Banding Machine

The production machine of the range. Two gluing and pressing zones, doubled trimming, scraping and buffing units, and four-head corner rounding, at feed speeds up to 28 m/min.

Stations
14, with doubled finishing units
Feed speed
18 / 23 / 28 m/min
Panel thickness
9–60 mm
Minimum panel
60 × 60 mm
Machine length
10.6 m
Total power
25 kW

Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.

Why the units are doubled

At 28 m/min a panel spends very little time at each station. Two fine trimming units, two scraping units and two buffing units share the work, so the finish stays the same as at lower speeds. Because the fine trimming and scraping units are pneumatic, they can be set for a different tape thickness from the screen.

Where it fits

Batch production of panel furniture, usually after an automatic nesting line or a beam saw, and often with a return conveyor so one operator runs it.

What's on the machine

Quick-melt glue units

Quick-melt glue units

Glue is melted on demand in a separate unit instead of sitting hot in the pot all day, which keeps it fresh and shortens warm-up.

Pressure rollers on an edge bander

Two pressing zones

Each glue pot is followed by its own set of six pressure rollers, which keeps the bond consistent at high feed speeds.

Glue pot on an edge bander

Glue pot

Hot-melt glue is kept at temperature and rolled onto the panel edge in an even film just before the tape meets it.

Edge bander touchscreen

Touchscreen control

Stations, feed speed and glue temperature are set on the touchscreen, and saved settings can be recalled for each tape type.

Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.

Stations, in order

  1. Separating agent spray
  2. Pre-milling
  3. Upper glue pot with quick-melt unit and six-roller pressing
  4. Lower glue pot and second six-roller pressing
  5. Fast end trimming
  6. Pneumatic fine trimming 1
  7. Pneumatic fine trimming 2
  8. Four-head corner rounding
  9. Pneumatic scraping 1
  10. Pneumatic scraping 2
  11. Flat scraping
  12. Cleaning agent spray
  13. Buffing 1
  14. Buffing 2

Capacity

Panel thickness
9–60 mm
Minimum panel width
60 mm
Minimum panel length
60 mm, or 150 mm with pre-milling on
Minimum panel size
60 × 60 mm, or 150 × 200 mm with pre-milling on
Feed speed
18, 23 or 28 m/min
Boards
MDF, blockboard, solid wood, particle board, plywood

Machine

Dimensions (L × W × H)
10580 × 960 × 1600 mm
Weight
4550 kg
Total power
25 kW
Air pressure
0.7 MPa

Options

Added at the factory when your machine is built.

Return conveyor

Brings each panel back to the operator, so one person can feed and stack.

PUR glue system

For moisture-resistant bonds in kitchens and bathrooms.

Voltage and plug

Built for your country's supply, for example 220 V / 60 Hz.

How it compares with the other models

ModelPanel thicknessFeed speedBest for
Compact Automatic Edge Bander 9–60 mm 16–23 m/min Small shops banding a few hundred edges a day
Edge Bander with Pre-Milling 9–60 mm 16–23 m/min Shops that want a tight glue line on every panel
Edge Bander with Pre-Milling and Corner Rounding 9–60 mm 16–23 m/min Doors and visible fronts that need rounded corners
Edge Bander with Dual Glue Pots 9–50 mm 16 / 18 / 23 m/min Shops switching between light and dark edging every day
High-Speed Edge Banding Machine this model 9–60 mm 18 / 23 / 28 m/min Factories banding all shift at up to 28 m/min
Laser Edge Banding Machine 9–60 mm 18 / 23 / 28 m/min Premium fronts where no glue line may show
45° Bevel Edge Banding Machine 18–25 mm 12 m/min Handle-free doors with a 45° beveled edge

Common questions

Which edging materials can it apply?

PVC, ABS, melamine and veneer edging in coils. The tape thickness range for each model is listed in the specifications.

Which glue does it use?

EVA hot-melt glue as standard. A PUR glue system can be fitted for kitchens, bathrooms and other damp environments.

What is the smallest panel it can band?

It depends on the model and on whether pre-milling is switched on. The minimum panel size is listed in the specifications.

Can I see the machine running before I pay the balance?

Yes. Every machine is run at the factory before packing, and you can join a video call to watch your own machine band test panels.

Get the price of the High-speed edge banding machine

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy