CNC Nesting Machine vs Panel Saw

Both cut sheets into cabinet parts, but they work very differently. Here is how to decide which one your shop needs.

The short answer

If you make cabinets with many different parts, holes and grooves, a nesting machine usually wins: it cuts, drills and grooves in one setup and needs less skilled labor. If you mostly cut large rectangular panels in volume with little drilling, a panel saw (especially a beam saw) can still be faster and cheaper.

Side by side

CNC nesting machinePanel saw / beam saw
OperationsCutting, vertical drilling, grooving, shaped partsStraight cuts only
Shaped or curved partsYesNo
Material yieldHigh: software packs mixed parts per sheetGood with optimization software, rectangles only
Edge quality for bandingGood with the right cuttersVery good (scoring blade)
Operator skillLow once programs are set upMedium to high
Machines needed for drillingNone for vertical holesSeparate boring machine
Throughput of simple rectanglesGoodVery high (beam saw stacks)

Choose a nesting machine if…

  • You build custom or semi-custom cabinets with varied parts
  • Most parts need shelf-pin, hinge or connector holes
  • Skilled saw operators are hard to find
  • You want design software to drive production directly

Keep or choose a panel saw if…

  • You cut large volumes of simple rectangular panels
  • Drilling is done on dedicated machines downstream
  • You already have a panel saw and only need more capacity at the cutting stage

Many growing shops end up with both: the nesting machine for cabinet parts, the panel saw for large plain panels and recuts.

Common questions

Does a nesting machine waste more material than a saw?

Usually the opposite. Nesting software fits parts from different cabinets onto the same sheet, which often improves yield, especially with mixed part sizes.

Is edge quality good enough for edge banding?

Yes, with compression cutters in good condition and the right feed speed. Dull tools are the most common cause of chipping.

Tell us about your project

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy