Edge Banding Machines

Edge Bander with Pre-Milling

Two cutters mill a fresh, square edge on the panel just before gluing. Saw marks and chipped laminate are removed, so the glue line is thin and even.

Stations
8: pre-mill to buff
Feed speed
16–23 m/min
Panel thickness
9–60 mm
Edge tape
0.4–3 mm
Machine length
4.5 m
Total power
9.6 kW

Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.

Why pre-milling matters

However good the saw or router, a cut edge carries small chips and tool marks, and it may not be perfectly square. If tape is glued straight onto it, those flaws show as a visible glue line. Pre-milling takes a thin, clean cut off the edge seconds before the glue goes on.

Where it fits

This is the model most cabinet shops settle on. It has the same footprint as the compact machine, with pre-milling and a six-roller pressure section added.

What's on the machine

Six pressure rollers

Six pressure rollers

One large roller and five smaller ones press the tape onto the glued edge along its full height, so the bond holds at the top and bottom corners.

Feed track and pressure beam

Feed track and pressure beam

Panels ride on a chain track and are held down from above by a row of rollers, so they stay straight through every station.

Edge bander touchscreen

Touchscreen control

Stations, feed speed and glue temperature are set on the touchscreen, and saved settings can be recalled for each tape type.

Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.

Stations, in order

  1. Pre-milling
  2. Gluing
  3. Pressing with six rollers
  4. End trimming
  5. Rough trimming
  6. Fine trimming
  7. Scraping
  8. Buffing

Capacity

Panel thickness
9–60 mm
Minimum panel width
60 mm
Edge tape thickness
0.4–3 mm
Feed speed
16–23 m/min
Boards
MDF, particle board, plywood, melamine-faced board, honeycomb board, flat solid wood

Machine

Dimensions (L × W × H)
4500 × 960 × 1600 mm
Total power
9.6 kW
Air pressure
0.6 MPa
Control
Touchscreen

Options

Added at the factory when your machine is built.

Return conveyor

Brings each panel back to the operator, so one person can feed and stack.

PUR glue system

For moisture-resistant bonds in kitchens and bathrooms.

Second glue pot

Keep two glue colours ready and switch without cleaning.

Voltage and plug

Built for your country's supply, for example 220 V / 60 Hz.

How it compares with the other models

ModelPanel thicknessFeed speedBest for
Compact Automatic Edge Bander 9–60 mm 16–23 m/min Small shops banding a few hundred edges a day
Edge Bander with Pre-Milling this model 9–60 mm 16–23 m/min Shops that want a tight glue line on every panel
Edge Bander with Pre-Milling and Corner Rounding 9–60 mm 16–23 m/min Doors and visible fronts that need rounded corners
Edge Bander with Dual Glue Pots 9–50 mm 16 / 18 / 23 m/min Shops switching between light and dark edging every day
High-Speed Edge Banding Machine 9–60 mm 18 / 23 / 28 m/min Factories banding all shift at up to 28 m/min
Laser Edge Banding Machine 9–60 mm 18 / 23 / 28 m/min Premium fronts where no glue line may show
45° Bevel Edge Banding Machine 18–25 mm 12 m/min Handle-free doors with a 45° beveled edge

Common questions

Which edging materials can it apply?

PVC, ABS, melamine and veneer edging in coils. The tape thickness range for each model is listed in the specifications.

Which glue does it use?

EVA hot-melt glue as standard. A PUR glue system can be fitted for kitchens, bathrooms and other damp environments.

What is the smallest panel it can band?

It depends on the model and on whether pre-milling is switched on. The minimum panel size is listed in the specifications.

Can I see the machine running before I pay the balance?

Yes. Every machine is run at the factory before packing, and you can join a video call to watch your own machine band test panels.

Get the price of the Edge bander with pre-milling

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy