Edge Banding Machines

Laser Edge Banding Machine

Bonds the edging with a laser instead of hot-melt glue. The joint between tape and panel is seamless, with no glue line to yellow or collect dirt.

Bonding
Laser, no glue pot
Feed speed
18 / 23 / 28 m/min
Corner rounding speed
18 m/min
Panel thickness
9–60 mm
Machine length
10.6 m
Total power
25 kW

Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.

How laser edge banding works

Laser edging has a thin functional layer on its back in place of a separate glue. The laser melts that layer in an instant as the tape meets the panel, and the pressure rollers close the joint. There is no glue to heat up, so the machine is ready as soon as it is switched on, and nothing to clean out of a glue pot.

Where it fits

High-gloss and matt fronts, bathroom and kitchen furniture, and any product sold on its finish. It needs laser-ready edging, which costs more than standard tape, so most factories run it alongside a hot-melt machine.

What's on the machine

Bonding zone of a laser edge bander

Bonding zone

The functional layer on the back of the edging is activated here and pressed straight onto the panel. No glue pot, and no visible glue line.

Edge bander touchscreen

Touchscreen control

Stations, feed speed and glue temperature are set on the touchscreen, and saved settings can be recalled for each tape type.

Dust extraction hoses on the trimming units

Dust extraction at each unit

Every milling and trimming unit has its own extraction hood and hose, which keeps chips off the glue line and the track.

Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.

Stations, in order

  1. Pre-milling
  2. Laser bonding and pressing
  3. Twin-rail end trimming
  4. Trimming with four high-speed motors
  5. Corner rounding
  6. Pneumatic double scraping
  7. Double buffing

Capacity

Panel thickness
9–60 mm
Minimum panel width
60 mm
Minimum panel length
60 mm, or 150 mm with pre-milling on
Minimum panel size
60 × 60 mm
Feed speed
18, 23 or 28 m/min
Corner rounding speed
18 m/min

Machine

Dimensions (L × W × H)
10580 × 960 × 1600 mm
Weight
4550 kg
Total power
25 kW
Air pressure
0.7 MPa

Options

Added at the factory when your machine is built.

Return conveyor

Brings each panel back to the operator, so one person can feed and stack.

Voltage and plug

Built for your country's supply, for example 220 V / 60 Hz.

How it compares with the other models

ModelPanel thicknessFeed speedBest for
Compact Automatic Edge Bander 9–60 mm 16–23 m/min Small shops banding a few hundred edges a day
Edge Bander with Pre-Milling 9–60 mm 16–23 m/min Shops that want a tight glue line on every panel
Edge Bander with Pre-Milling and Corner Rounding 9–60 mm 16–23 m/min Doors and visible fronts that need rounded corners
Edge Bander with Dual Glue Pots 9–50 mm 16 / 18 / 23 m/min Shops switching between light and dark edging every day
High-Speed Edge Banding Machine 9–60 mm 18 / 23 / 28 m/min Factories banding all shift at up to 28 m/min
Laser Edge Banding Machine this model 9–60 mm 18 / 23 / 28 m/min Premium fronts where no glue line may show
45° Bevel Edge Banding Machine 18–25 mm 12 m/min Handle-free doors with a 45° beveled edge

Common questions

Which edging materials can it apply?

PVC, ABS, melamine and veneer edging in coils. The tape thickness range for each model is listed in the specifications.

Which glue does it use?

EVA hot-melt glue as standard. A PUR glue system can be fitted for kitchens, bathrooms and other damp environments.

What is the smallest panel it can band?

It depends on the model and on whether pre-milling is switched on. The minimum panel size is listed in the specifications.

Can I see the machine running before I pay the balance?

Yes. Every machine is run at the factory before packing, and you can join a video call to watch your own machine band test panels.

Get the price of the Laser edge banding machine

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy