CNC Nesting Machines

Nesting Machine with Drilling Block

An ATC nesting machine with an added vertical drilling block. Rows of shelf-pin holes and hinge holes are drilled in one stroke instead of one by one, which saves real time on cabinet parts.

Working area
1300 × 2800 mm
Spindle
9 kW
Drilling block
Vertical multi-spindle
Tool changer
Linear ATC
Hold-down
Vacuum table

Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.

When the drilling block pays off

If your cabinet sides carry many shelf-pin rows and hinge holes, a router spindle drilling them one at a time becomes the bottleneck. A drilling block brings several drills down together, cutting the cycle time of hole-heavy parts.

If most of your parts have only a few holes, a standard ATC machine is usually enough.

What's on the machine

Spindle head and drill block

Spindle and drill block on one head

The routing spindle and a vertical drill block share the same carriage. Shelf-pin rows and hinge holes are drilled in one stroke instead of one by one.

Tool holders in the linear tool changer

Linear tool changer

Cutters, drills and grooving tools sit in a rack at the end of the table. The program swaps them in a few seconds, so mixed jobs run without stopping.

Pop-up locating pins on the nesting table

Pop-up locating pins

Pins rise at the table edge and the sheet is pushed against them. Every board starts from the same zero point, which keeps hole positions consistent.

Touchscreen CNC controller

Touchscreen controller

Nesting files from your cabinet design software load at the machine. The operator picks the job, checks the sheet and presses start.

Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.

Working area

Sheet size (X × Y)
1300 × 2800 mm
Z travel
200 mm
Table
Vacuum table, zoned
Sheet positioning
Pop-up locating pins

Spindle and tooling

Spindle
9 kW, air-cooled, 24,000 rpm
Tool changer
Linear, 8–12 positions
Tool holder
ISO30 / ER32
Drilling
Vertical drill block, 9 spindles (5 + 4)

Motion

Drives
AC servo motors
Transmission
Rack and pinion (X, Y), ball screw (Z)
Guide rails
Linear guide rails
Rapid travel
Up to 60–80 m/min

Control and power

Controller
Industrial CNC controller with touchscreen
File format
G-code from cabinet design software
Vacuum pump
7.5 kW
Power supply
380 V / 50 Hz, 3-phase (other voltages on request)

Options

Added at the factory when your machine is built.

Larger table

For 1220 × 3050 mm or 2100 × 2800 mm sheets.

Automatic loading and unloading

Lift table at the infeed and a conveyor at the outfeed.

Label printer

Prints and applies a part label before the sheet is cut.

Dust collector

Sized to the machine, with hose and fittings.

Voltage and plug

Built for your country's supply, for example 220 V / 60 Hz.

How it compares with the other models

ModelWorking areaToolingBest for
ATC CNC Nesting Machine 1300 × 2500 / 2800 mm Linear, 8–12 tools Cabinet shops with varied parts, door patterns and several board types
Nesting Machine with Drilling Block this model 1300 × 2800 mm Linear ATC Parts with many shelf-pin rows and hinge holes
4-Process CNC Nesting Machine 1300 × 2500 mm None (fixed tools) Small shops moving from a panel saw, simple repeating parts
Invisible Connector Nesting Machine 1300 × 2800 mm Linear ATC Wardrobes and cabinets with no visible cam locks
Automatic Nesting Cell (Loading, Labeling & Unloading) 1300 × 2800 mm Linear ATC Factories cutting all day with one operator per line

Common questions

Can I see the machine running before I pay the balance?

Yes. Every machine is test-cut at the factory, and you can join a video call to watch your own machine run before it is packed.

What does the price include?

The quote lists the machine configuration, standard tools and accessories, export packing and the shipping terms (FOB or CIF). Import duties and local installation costs are not included.

How is it shipped and installed?

The machine ships by sea in a container. Installation is guided remotely by video call, and on-site installation with operator training can be arranged.

Which software do I need?

Any cabinet design program that exports nesting G-code for the controller. Tell us what you use now and we will confirm compatibility or suggest an option.

Get the price of the Nesting machine with drilling block

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy