Edge Banding Machines

Edge Bander with Dual Glue Pots

Two glue pots on one machine. Keep white glue in one and dark in the other and change between them at the screen, without draining and cleaning a pot.

Stations
Dual glue pots, pre-milling, corner rounding
Feed speed
16 / 18 / 23 m/min
Panel thickness
9–50 mm
Minimum panel
50 × 50 mm
Machine length
8.6 m
Total power
24 kW

Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.

Why two glue pots

Glue colour should match the edging. White glue behind a dark tape shows as a pale line, and dark glue behind white tape shows worse. With one pot, changing colour means running it empty and cleaning it, which costs time and glue. With two pots, both colours stay hot and ready.

Where it fits

Batch production with frequent colour changes. It is a heavier, longer machine than the corner rounding model and handles panels down to 50 × 50 mm.

What's on the machine

Two glue pots side by side

Two glue pots

Two glue pots sit side by side. Keep light glue in one and dark in the other and switch between them without cleaning out a pot.

Edge tape reel table

Tape reel table

A full coil of edging sits on the reel table and feeds into the machine automatically. Changing tape means swapping the coil.

Dust extraction hoses on the trimming units

Dust extraction at each unit

Every milling and trimming unit has its own extraction hood and hose, which keeps chips off the glue line and the track.

Edge bander touchscreen

Touchscreen control

Stations, feed speed and glue temperature are set on the touchscreen, and saved settings can be recalled for each tape type.

Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.

Capacity

Panel thickness
9–50 mm
Minimum panel width
50 mm
Minimum panel length
50 mm, or 150 mm with pre-milling on
Minimum panel size
50 × 50 mm, or 150 × 200 mm with pre-milling on
Feed speed
16, 18 or 23 m/min

Machine

Dimensions (L × W × H)
8630 × 900 × 1750 mm
Weight
3250 kg
Total power
24 kW
Air pressure
0.6 MPa

Options

Added at the factory when your machine is built.

Return conveyor

Brings each panel back to the operator, so one person can feed and stack.

PUR glue system

For moisture-resistant bonds in kitchens and bathrooms.

Voltage and plug

Built for your country's supply, for example 220 V / 60 Hz.

How it compares with the other models

ModelPanel thicknessFeed speedBest for
Compact Automatic Edge Bander 9–60 mm 16–23 m/min Small shops banding a few hundred edges a day
Edge Bander with Pre-Milling 9–60 mm 16–23 m/min Shops that want a tight glue line on every panel
Edge Bander with Pre-Milling and Corner Rounding 9–60 mm 16–23 m/min Doors and visible fronts that need rounded corners
Edge Bander with Dual Glue Pots this model 9–50 mm 16 / 18 / 23 m/min Shops switching between light and dark edging every day
High-Speed Edge Banding Machine 9–60 mm 18 / 23 / 28 m/min Factories banding all shift at up to 28 m/min
Laser Edge Banding Machine 9–60 mm 18 / 23 / 28 m/min Premium fronts where no glue line may show
45° Bevel Edge Banding Machine 18–25 mm 12 m/min Handle-free doors with a 45° beveled edge

Common questions

Which edging materials can it apply?

PVC, ABS, melamine and veneer edging in coils. The tape thickness range for each model is listed in the specifications.

Which glue does it use?

EVA hot-melt glue as standard. A PUR glue system can be fitted for kitchens, bathrooms and other damp environments.

What is the smallest panel it can band?

It depends on the model and on whether pre-milling is switched on. The minimum panel size is listed in the specifications.

Can I see the machine running before I pay the balance?

Yes. Every machine is run at the factory before packing, and you can join a video call to watch your own machine band test panels.

Get the price of the Edge bander with dual glue pots

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy