CNC Nesting Machines

Automatic Nesting Cell (Loading, Labeling & Unloading)

A nesting machine with automatic sheet loading, part labeling and unloading. Sheets go in, labeled parts come out, and one operator can keep the line running.

Working area
1300 × 2800 mm
Tool changer
Linear ATC
Loading
Automatic lift table
Labeling
Automatic label printer
Unloading
Push-off / conveyor
Operators
1

Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.

Why automate loading and unloading

On a manual nesting machine the spindle waits while the operator clears parts and loads the next sheet. Automating these steps keeps the spindle cutting and lets one operator run the line. Automatic labels also tell the edge banding and drilling stations what each part is, which reduces mistakes downstream.

What's on the machine

Automatic lift table for sheet loading

Automatic lift table

A stack of sheets sits on a scissor lift. The top sheet is raised to table height and pulled onto the machine, so nobody lifts boards by hand.

Nesting line with loading and outfeed installed in a workshop

Outfeed conveyor

Finished parts are pushed onto a belt while the next sheet loads. The operator sorts parts at the conveyor and the spindle keeps cutting.

Tool holders in the linear tool changer

Linear tool changer

Cutters, drills and grooving tools sit in a rack at the end of the table. The program swaps them in a few seconds, so mixed jobs run without stopping.

Touchscreen CNC controller

Touchscreen controller

Nesting files from your cabinet design software load at the machine. The operator picks the job, checks the sheet and presses start.

Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.

Working area

Sheet size (X × Y)
1300 × 2800 mm
Z travel
200 mm
Table
Vacuum table, zoned
Sheet positioning
Automatic, with pop-up pins and pusher

Spindle and tooling

Spindle
9 kW, air-cooled, 24,000 rpm
Tool changer
Linear, 8–12 positions
Tool holder
ISO30 / ER32
Drilling
By spindle

Motion

Drives
AC servo motors
Transmission
Rack and pinion (X, Y), ball screw (Z)
Guide rails
Linear guide rails
Rapid travel
Up to 60–80 m/min

Control and power

Controller
Industrial CNC controller with touchscreen
File format
G-code from cabinet design software
Vacuum pump
7.5 kW
Power supply
380 V / 50 Hz, 3-phase (other voltages on request)

Loading and unloading

Infeed
Scissor lift table with automatic sheet pick-up
Labeling
Automatic label printer and applicator
Outfeed
Push-off onto belt conveyor
Operators
1

Options

Added at the factory when your machine is built.

Larger table

For 1220 × 3050 mm or 2100 × 2800 mm sheets.

Label printer

Prints and applies a part label before the sheet is cut.

Vertical drill block

Multi-spindle head for shelf-pin rows and hinge holes.

Dust collector

Sized to the machine, with hose and fittings.

Voltage and plug

Built for your country's supply, for example 220 V / 60 Hz.

How it compares with the other models

ModelWorking areaToolingBest for
ATC CNC Nesting Machine 1300 × 2500 / 2800 mm Linear, 8–12 tools Cabinet shops with varied parts, door patterns and several board types
Nesting Machine with Drilling Block 1300 × 2800 mm Linear ATC Parts with many shelf-pin rows and hinge holes
4-Process CNC Nesting Machine 1300 × 2500 mm None (fixed tools) Small shops moving from a panel saw, simple repeating parts
Invisible Connector Nesting Machine 1300 × 2800 mm Linear ATC Wardrobes and cabinets with no visible cam locks
Automatic Nesting Cell (Loading, Labeling & Unloading) this model 1300 × 2800 mm Linear ATC Factories cutting all day with one operator per line

Common questions

Can I see the machine running before I pay the balance?

Yes. Every machine is test-cut at the factory, and you can join a video call to watch your own machine run before it is packed.

What does the price include?

The quote lists the machine configuration, standard tools and accessories, export packing and the shipping terms (FOB or CIF). Import duties and local installation costs are not included.

How is it shipped and installed?

The machine ships by sea in a container. Installation is guided remotely by video call, and on-site installation with operator training can be arranged.

Which software do I need?

Any cabinet design program that exports nesting G-code for the controller. Tell us what you use now and we will confirm compatibility or suggest an option.

Get the price of the Automatic nesting cell

Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.

What you get back
A recommended configuration, FOB or CIF price and lead time.
Useful to include
Sheet size, board types, your power supply and any machines you already own.
Want to see it first?
Ask for a video call from the factory floor.

We only use your details to answer this request. Privacy policy