Glue pot
Hot-melt glue is kept at temperature and rolled onto the panel edge in an even film just before the tape meets it.
The shortest automatic edge bander in the range. It glues, trims, scrapes and buffs in one pass, and fits a workshop where floor space is tight.
Test-cut at the factory before shipping. Sea freight worldwide, with remote or on-site installation.
A panel goes in with a raw cut edge and comes out banded and finished. The machine rolls glue onto the edge, presses the tape on, cuts it flush at both ends, trims the top and bottom overhang in two passes, scrapes the radius smooth and buffs it.
It is the usual first edge bander for a shop that has just moved to a nesting machine or panel saw. There is no pre-milling unit, so it relies on a clean cut from the saw or router.
Hot-melt glue is kept at temperature and rolled onto the panel edge in an even film just before the tape meets it.
End trimming cuts the tape flush at the front and back of the panel. Rough and fine trimming then take off the overhang on the top and bottom.
Each station is switched on or off from the panel, and the glue temperature is set and shown here.
Typical configuration. Final specifications are confirmed in your quotation and can be adapted to your sheet size and power supply.
Added at the factory when your machine is built.
| Model | Panel thickness | Feed speed | Best for |
|---|---|---|---|
| Compact Automatic Edge Bander this model | 9–60 mm | 16–23 m/min | Small shops banding a few hundred edges a day |
| Edge Bander with Pre-Milling | 9–60 mm | 16–23 m/min | Shops that want a tight glue line on every panel |
| Edge Bander with Pre-Milling and Corner Rounding | 9–60 mm | 16–23 m/min | Doors and visible fronts that need rounded corners |
| Edge Bander with Dual Glue Pots | 9–50 mm | 16 / 18 / 23 m/min | Shops switching between light and dark edging every day |
| High-Speed Edge Banding Machine | 9–60 mm | 18 / 23 / 28 m/min | Factories banding all shift at up to 28 m/min |
| Laser Edge Banding Machine | 9–60 mm | 18 / 23 / 28 m/min | Premium fronts where no glue line may show |
| 45° Bevel Edge Banding Machine | 18–25 mm | 12 m/min | Handle-free doors with a 45° beveled edge |
PVC, ABS, melamine and veneer edging in coils. The tape thickness range for each model is listed in the specifications.
EVA hot-melt glue as standard. A PUR glue system can be fitted for kitchens, bathrooms and other damp environments.
It depends on the model and on whether pre-milling is switched on. The minimum panel size is listed in the specifications.
Yes. Every machine is run at the factory before packing, and you can join a video call to watch your own machine band test panels.
Tell us what you make and roughly how many sheets you cut per day. We reply within one working day.